Home / Guides / Bathroom

Bathroom

How to clean shower grout naturally (without wrecking it)

Updated November 15, 2026 · 12 min read · MakeClean

Dark shower grout is usually soap scum, body oil, and mildew sitting in a porous surface—not a permanent new color. A paste and a soft brush will lift a lot of it. Vinegar is the popular “natural” move, and it is the wrong one for grout you want to keep.

Some product links below are placeholders for Amazon Associates links. They are marked TODO until a tracking tag is approved. See our affiliate disclosure.

Why vinegar is a bad grout cleaner

Grout is cement-based and slightly alkaline. Acid etches it over time, especially if it is unsealed, and a rougher surface stains faster the next month. Keep vinegar and other acids off marble, travertine, limestone, and other natural stone tile or thresholds entirely.

Mixing baking soda with vinegar for the fizz mostly cancels both products. If you want a scrub, use baking soda. If you want acid, use it on mineral film on glass, not on the grout lines. That distinction is spelled out in natural cleaners that actually work.

The baking soda and peroxide method

  1. Rinse the shower so the grout is wet and loose hair is gone.
  2. Mix baking sodaTODO with enough 3% hydrogen peroxideTODO to make a spreadable paste, about the thickness of toothpaste. A drop of dish soap is optional.
  3. Spread the paste onto the grout lines. Let it sit 10–15 minutes, but do not let it dry out completely. If it starts to crust, mist it lightly with water.
  4. Scrub with a stiff nylon grout brushTODO or an old toothbrush, along each line. Do not use a wire brush; it digs out grout.
  5. Rinse thoroughly, squeegee, and leave the fan on so the stall dries.

Stubborn lines often need a second pass, not a harsher tool. Test peroxide on a hidden stretch of colored grout first; it can lighten some pigments if you leave it on a long time.

For mildew that the paste does not lift

An oxygen bleach powderTODO dissolved in hot water (follow the box) is a reasonable next step on tile and grout. Pour or sponge it on, give it the contact time on the label, scrub, and rinse. It is gentler in a small bathroom than a chlorine-bleach fog, and it is a better match for organic stains than vinegar.

Do not mix products in the stall Rinse thoroughly before you switch cleaners. Never combine peroxide, vinegar, or oxygen bleach with chlorine bleach. Mix the baking-soda paste fresh; do not store leftover peroxide and vinegar in the same bottle.

Caulk is not grout

The flexible bead along the tub, shower pan, or corners is usually caulk, not grout. Mildew that has grown into a silicone bead often cannot be scrubbed out. If the caulk is stained through, shrinking, or pulling away, cutting it out and recaulking is the real fix. Cleaning a failing bead just postpones the leak.

Seal the grout after it is clean

Let the grout dry completely—often 24–48 hours, longer in a poorly ventilated bath—then apply a penetrating grout sealerTODO. Sealing dirty grout locks the stain in, so this step comes last. Reseal on the schedule the bottle suggests; in a shower that is often about once a year.

When “natural” is no longer the job

Once the lines are clean, keep them that way with a squeegee, the fan, and a weekly brush—those steps live on the bathroom cleaning checklist. Mineral spots on the glass are a different problem; use the hard-water method on the door, not on the grout.

Put the schedule on the fridge

The MakeClean Cleaning Planner is a printable weekly and monthly checklist—same system as this site, ready to write on. Digital download, $7.

See the planner

Related guides